JN0-105완벽한시험기출자료 & JN0-105퍼펙트최신버전덤프자료

BONUS!!! DumpTOP JN0-105 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1b4eoaPstRMCkDA2prak5Uh-kF0w10v4k

Juniper JN0-105 덤프는Juniper JN0-105시험문제변경에 따라 주기적으로 업데이트를 진행하여 저희 덤프가 항상 가장 최신버전이도록 보장해드립니다. 고객님들에 대한 깊은 배려의 마음으로 고품질Juniper JN0-105덤프를 제공해드리고 디테일한 서비스를 제공해드리는것이 저희의 목표입니다.

Juniper JN0-105 시험요강:

주제	소개
주제 1	Junos OS Fundamentals: It covers concepts, benefits, and functionality of the core elements of the Junos OS.
주제 2	Configuration Basics: Identification of the main elements for configuring Junos devices is discussed in this topic. Moreover, it describes configuring basic components of a Junos device
주제 3	Operational Monitoring and Maintenance: Different methods of monitoring or maintaining Junos devices are identified in this topic. Lastly, it discusses monitoring or maintenance procedures for a Junos device.

>> JN0-105완벽한 시험기출자료 <<

JN0-105퍼펙트 최신버전 덤프자료 - JN0-105퍼펙트 최신 덤프

이 글을 보시게 된다면Juniper인증 JN0-105시험패스를 꿈꾸고 있는 분이라고 믿습니다. Juniper인증 JN0-105시험공부를 아직 시작하지 않으셨다면 망설이지 마시고DumpTOP의Juniper인증 JN0-105덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. DumpTOP의Juniper인증 JN0-105덤프는 고객님께서 Juniper인증 JN0-105시험을 패스하는 필수품입니다.

최신 JNCIA JN0-105 무료샘플문제 (Q77-Q82):

질문 # 77
Which two statements are correct about MAC addresses? (Choose two.)

A. Switches use the destination MAC address to identify the next-hop destination and to change the destination MAC address in the frame.
B. The source and destination MAC addresses always remains static to the final destination.
C. Switches use the Address Resolution Protocol table to assign MAC addresses to network interface cards in the forwarding frame.
D. The MAC address identifies the physical hardware.

정답：A,D

설명：
MAC (Media Access Control) addresses are unique identifiers assigned to network interfaces for communications at the data link layer of a network segment. MAC addresses are used to identify the physical hardware on a network. In the context of Ethernet switches, the destination MAC address in incoming frames is used to determine the appropriate output port for forwarding the frame towards its final destination. The switch does not change the destination MAC address; it uses the MAC address to make forwarding decisions within the local network segment.

질문 # 78
What are two physical interface properties? (Choose two.)

A. MAC address
B. MTU
C. routing protocols
D. IP address

정답：A,B

설명：
Two physical interface properties in Junos OS include the MAC address (A) and the Maximum Transmission Unit (MTU) size (D). The MAC address is a hardware identifier for the network interface, while the MTU size determines the largest packet size that the interface can transmit without needing to fragment the packet.

질문 # 79
You are asked to configure your device running Junos OS to automatically archive your configuration upon commit In this scenario, which two methods are supported by the Junos OS? (Choose two)

A. SCP
B. FTP
C. RCP
D. HTTP

정답：A,C

설명：
Junos OS supports multiple methods for automatically archiving configurations upon commit. Two of the supported methods are SCP (Secure Copy Protocol) and RCP (Remote Copy Protocol). These methods can be configured to save the configuration files to a remote server automatically whenever a commit is made.
Reference:
"You can configure Junos OS to automatically archive the configuration using protocols such as SCP and RCP upon commit."

질문 # 80
Which two components are included in a transport header? (Choose two.)

A. source port number
B. source MAC address
C. destination MAC address
D. destination port number

정답：A,D

설명：
The transport layer in the OSI model is responsible for end-to-end communication and error recovery. In a transport header, such as TCP or UDP, the key components include the source port number and the destination port number. These port numbers are used to identify sending and receiving applications. The source port number indicates the port of the sending application, and the destination port number refers to the port of the receiving application. MAC addresses, on the other hand, are part of the data link layer (Layer 2) and would be included in an Ethernet header, not a transport header.

질문 # 81
You have just increased the MTU size of interface ge-0/0/0 and committed the configuration.
Which command would help you identify the applied MTU change?

A. monitor traffic interface ge-0/0/0
B. show interfaces ge-0/0/0
C. monitor interface ge-0/0/0
D. show interfaces ge-0/0/0 terse

정답：B

설명：
After increasing the MTU size of an interface and committing the configuration, the command to verify the applied MTU change is D, "show interfaces ge-0/0/0." This command displays detailed information about the interface, including the current MTU size, making it the best choice for verifying the applied changes.

질문 # 82
......

많은 사이트에서도 무료Juniper JN0-105덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한Juniper JN0-105데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리DumpTOP에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다

JN0-105퍼펙트 최신버전 덤프자료: https://www.dumptop.com/Juniper/JN0-105-dump.html

BONUS!!! DumpTOP JN0-105 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1b4eoaPstRMCkDA2prak5Uh-kF0w10v4k

Ted Reed Ted Reed

Biography

JN0-105완벽한시험기출자료 & JN0-105퍼펙트최신버전덤프자료

Juniper JN0-105 시험요강:

JN0-105퍼펙트 최신버전 덤프자료 - JN0-105퍼펙트 최신 덤프

최신 JNCIA JN0-105 무료샘플문제 (Q77-Q82):

Courses

Quick Links

Contact