RCNI Pass4sure Dumps & RCNI Sichere Praxis Dumps

Außerdem sind jetzt einige Teile dieser ZertSoft RCNI Prüfungsfragen kostenlos erhältlich: https://drive.google.com/open?id=1ODADBmPYaR-kUUGrMSIxusNYtuqXvkhL

ZertSoft spezialisiert sich auf die Schulungsunterlagen zur RUCKUS RCNI Zertifizierungsprüfung. Mit ZertSoft brauchen Sie sich keine Sorgen für die RUCKUS RCNI Zertifizierungsprüfung zu machen. Die Zertifizierungsantworten von ZertSoft sind qualitativ hochwertig. Sobald Sie ZertSoft wählen, können Sie in kurzer Zeit die Prüfung mit einer hohen Note die RUCKUS RCNI Zertifizierungsprüfung effizient bestehen und bessere Resultate bei weniger Einsatz erzielen.

RUCKUS RCNI Prüfungsplan:

Thema	Einzelheiten
Thema 1	Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.
Thema 2	ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2 3 protocols, and ICX services, IPv4 IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Thema 3	ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.
Thema 4	RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.

>> RCNI Quizfragen Und Antworten <<

RCNI Übungsmaterialien & RCNI Lernführung: RUCKUS Certified Networking Implementer & RCNI Lernguide

Haben Sie die Fragenkataloge von RUCKUS RCNI aus ZertSoft, werden Sie zugleich den Schlüssel zum Erfolg und eine schönere Zukunft haben. Nachdem Sie die Fragenkataloge von RUCKUS RCNI aus ZertSoft gekauft haben, werden Sie einjährige kostenlose Aktualisierung genießen. Wenn Ihre gekauften Produkte irgend ein Qualitätsproblem haben oder Sie die RCNI Prüfung nicht bestehen, erstatten wir alle Ihren bezahlten Summe zurück.

RUCKUS Certified Networking Implementer RCNI Prüfungsfragen mit Lösungen (Q46-Q51):

46. Frage
What are two differences between Class of Service (CoS) and Differentiated Services Code Point (DSCP)? (Choose two.)

A. DSCP defines priority levels and CoS manipulates traffic according to these defined priority levels.
B. CoS operates at Layer 2 in OSI model, whereas DSCP operates in Layer 3.
C. DSCP operates at Layer 2 in OSI model, whereas CoS operates in Layer 3.
D. CoS defines priority levels and DSCP manipulates traffic according to these defined priority levels.
E. DSCP is simpler and can scale easily as the network grows. CoS becomes more complex as network demand for prioritized data increase.

Antwort: B,D

47. Frage
Which command must be configured at the interface level to honor Differentiated Services Code Point (DSCP)-based Class of Service (CoS) on a ICX7750?

A. qos profile
B. qos-tos map dscp-priority
C. ip dscp-remark 1
D. trust dscp

Antwort: D

48. Frage
Which ICX model can run silently in fanless mode?

A. ICX7550-24P
B. ICX7150-48ZP
C. ICX7150-48P
D. ICX7150-48PF

Antwort: C

49. Frage
Which command will create VE 2 on an ICX running FastIron 08.0.95?

A. ICX(config-vlan-2)# router-interface ve 2
B. ICX(config-vlan-2)# vlan 2 name VE2
C. ICX(config-vlan-2)# enable
D. ICX(config-vlan-2)# interface ve 2

Antwort: A

Begründung:
In RUCKUS ICX switches, a Virtual Ethernet (VE) interface, also known as a routed interface, is used to route traffic between VLANs. To create a VE interface and associate it with a VLAN, follow these steps:
* Access VLAN Configuration Mode: Enter global configuration mode and then VLAN configuration mode for the desired VLAN. For VLAN 2, the commands are:
* Create and Associate VE Interface: Within VLAN configuration mode, create the VE interface and associate it with the VLAN using the router-interface command:
router-interface ve 2
This command creates VE interface 2 and links it to VLAN 2.
* Configure the VE Interface: Exit VLAN configuration mode and enter interface configuration mode for the newly created VE interface to assign an IP address:
interface ve 2
ip address <IP_address> <subnet_mask>
Replace <IP_address> and <subnet_mask> with the desired IP address and subnet mask for the VE interface.
By following these steps, you create a VE interface that enables routing for the associated VLAN. This configuration is essential for inter-VLAN routing,

50. Frage
At which prompt can the ping command be executed?

A. ICX7150-C12 Router(config-if-mgmt-1)#
B. ICX7150-C12 Router(config)#
C. ICX7150-C12 Router#
D. ICX7150-C12 Router(config-if-e1000-1/1/1)#

Antwort: C

Begründung:
* Understanding CLI Levels:
* The ping command is used to test connectivity to other devices by sending ICMP echo requests.
* It can only be executed from the privileged EXEC mode, which is indicated by the Router# prompt.
* Why Other Prompts Don't Work:
* A. Router(config-if-mgmt-1)#: This is the interface configuration mode for the management port and does not allow execution of diagnostic commands like ping.
* B. Router(config)#: This is the global configuration mode, which is used to configure the switch but does not support diagnostic commands.
* D. Router(config-if-e1000-1/1/1)#: This is the interface configuration mode for Ethernet 1/1/1, which also does not allow execution of ping.
References:
* RUCKUS ICX CLI Guide: RUCKUS Documentation

51. Frage
......

Die Produkte von PassTest sind für diejenigen, die sich an der RUCKUS RCNI Zertifizierungsprüfung beteiligen,geeignet. Die Schulungsmaterialien von ZertSoft enthalten nicht nur Trainingsmaterialien zur RUCKUS RCNI Zertifizierungsprüfung, um Ihre Fachkenntnisse zu konsolidieren, sondern auch die genauen Prüfungsfragen und Antworten. Wir versprechen, dass Sie die RUCKUS RCNI Zertifizierungsprüfung beim ersten Versuch mit einer hohen Note bestehen können.

RCNI Kostenlos Downloden: https://www.zertsoft.com/RCNI-pruefungsfragen.html

Laden Sie die neuesten ZertSoft RCNI PDF-Versionen von Prüfungsfragen kostenlos von Google Drive herunter: https://drive.google.com/open?id=1ODADBmPYaR-kUUGrMSIxusNYtuqXvkhL

Oliver Taylor Oliver Taylor

Biography

RCNI Pass4sure Dumps & RCNI Sichere Praxis Dumps

RUCKUS RCNI Prüfungsplan:

RCNI Übungsmaterialien & RCNI Lernführung: RUCKUS Certified Networking Implementer & RCNI Lernguide

RUCKUS Certified Networking Implementer RCNI Prüfungsfragen mit Lösungen (Q46-Q51):

Courses

Quick Links

Contact