Copyright © 2023 Russell College Design By Nubevest.
Bestehen Ihre Freude die CompTIA N10-009 Zertifizierungsprüfung? Wie können Sie das Ziel erreichen? Wir EchteFrage können Ihnen die Methode zeigen. Die CompTIA N10-009 Dumps von EchteFrage sind die neuesten und umfassendsten Prüfungsunterlagen und wir bieten Ihnen auch sehr guten Service. Wir EchteFrage sind die einzige Wahl für Sie CompTIA N10-009 Zertifizierungsprüfung zu bestehen. Informieren Sie sich bitte an EchteFrage Website. Lassen Wir Ihnen helfen.
| Thema | Einzelheiten |
|---|---|
| Thema 1 |
|
| Thema 2 |
|
| Thema 3 |
|
| Thema 4 |
|
| Thema 5 |
|
Leute aus verschiedenen Bereichen bemühen sich um ihre Zukunft. Bemühen Sie sich auch um Erhöhung Ihrer Fähigkeit? Haben Sie das CompTIA N10-009 Zertifikat? Wie viel wissen Sie über CompTIA N10-009 Zertifizierungsprüfung? Was sollen Sie machen, wenn Sie nicht genug Kenntnisse zur N10-009 Prüfung beherrschen? Machen Sie sich keine Sorge. EchteFrage kann Ihnen Hilfe bieten.
253. Frage
A network technician needs to resolve some issues with a customer's SOHO network.
The customer reports that some of the devices are not connecting to the network, while others appear to work as intended.
INSTRUCTIONS
Troubleshoot all the network components and review the cable test results by Clicking on each device and cable.
Diagnose the appropriate component(s) by identifying any components with a problem and recommend a solution to correct each problem.
Cable Test Results:
Cable 1:
Cable 2:
Cable 3:
Cable 4:
Antwort:
Begründung:
See the Explanation for detailed information on this simulation.
Explanation:
(Note: Ips will be change on each simulation task, so we have given example answer for the understanding) To troubleshoot all the network components and review the cable test results, you can use the following steps:
* Click on each device and cable to open its information window.
* Review the information and identify any problems or errors that may affect the network connectivity or
* performance.
* Diagnose the appropriate component(s) by identifying any components with a problem and recommend a solution to correct each problem.
* Fill in the remediation form using the drop-down menus provided.
Here is an example of how to fill in the remediation form for PC1:
* The component with a problem is PC1.
* The problem is Incorrect IP address.
* The solution is Change the IP address to 192.168.1.10.
You can use the same steps to fill in the remediation form for other components.
To enter commands in each device, you can use the following steps:
* Click on the device to open its terminal window.
* Enter the command ipconfig /all to display the IP configuration of the device, including its IP address, subnet mask, default gateway, and DNS servers.
* Enter the command ping <IP address> to test the connectivity and reachability to another device on the network by sending and receiving echo packets. Replace <IP address> with the IP address of the destination device, such as 192.168.1.1 for Core Switch 1.
* Enter the command tracert <IP address> to trace the route and measure the latency of packets from the device to another device on the network by sending and receiving packets with increasing TTL values.
Replace <IP address> with the IP address of the destination device, such as 192.168.1.1 for Core Switch
1.
Here is an example of how to enter commands in PC1:
* Click on PC1 to open its terminal window.
* Enter the command ipconfig /all to display the IP configuration of PC1. You should see that PC1 has an incorrect IP address of 192.168.2.10, which belongs to VLAN 2 instead of VLAN 1.
* Enter the command ping 192.168.1.1 to test the connectivity to Core Switch 1. You should see that PC1 is unable to ping Core Switch 1 because they are on different subnets.
* Enter the command tracert 192.168.1.1 to trace the route to Core Switch 1. You should see that PC1 is unable to reach Core Switch 1 because there is no route between them.
You can use the same steps to enter commands in other devices, such as PC3, PC4, PC5, and Server 1.
254. Frage
As part of an attack, a threat actor purposefully overflows the content-addressable memory (CAM) table on a switch. Which of the following types of attacks is this scenario an example of?
Antwort: C
Begründung:
Definition of MAC Flooding:
MAC flooding is an attack where a malicious actor sends numerous fake MAC addresses to a switch, overwhelming its CAM table. The CAM table stores MAC addresses and their associated ports for efficient traffic forwarding.
Impact of MAC Flooding:
CAM Table Overflow: When the CAM table is full, the switch cannot learn new MAC addresses and is forced to broadcast traffic to all ports, leading to a degraded network performance and potential data interception.
Switch Behavior: The switch operates in a fail-open mode, treating the network as a hub, which can be exploited for eavesdropping on traffic.
255. Frage
A network engineer is setting up a new VoIP network for a customer. The current network is segmented only for computers and servers. No additional switch ports can be used in the new network. Which of the following does the engineer need to do to configure the network correctly? (Select TWO).
Antwort: A,B
Begründung:
To support VoIP on the same physical ports used by computers:
B:Enable 802.1Q: This standard supports VLAN tagging, allowing voice and data traffic to share the same port using separate VLANs.
D: Set up voice VLANs: Separating voice traffic into its own VLAN improves QoS and manageability.
Other options are not directly related to configuring VoIP over existing ports:
A: Network translation definitions (NAT) are unrelated to switch-level VLAN configuration.
C: Routing protocols are not necessary at the switch level for VLAN setup.
E: DNS is not required for the switch or VLAN setup.
F: Perimeter network (DMZ) is used for public-facing servers, not VoIP VLANs.
# Reference:
CompTIA Network+ N10-009 Official Objectives: 2.3 - Given a scenario, configure and verify VLANs.
CompTIA Network+ N10-009 Official Objectives: 3.6 - Explain the characteristics of network topologies and types.
256. Frage
A help desk technician receives a report that users cannot access internet URLs. The technician performs ping tests and finds that sites fail when a URL is used but succeed when an IP is used. Which of the following tools should the technician utilize next?
Antwort: C
Begründung:
The issue is clearly related toDNS resolution, as IP-based connections succeed but domain name-based ones fail.
* D. dig(Domain Information Groper) is a DNS lookup tool used to troubleshoot DNS problems by querying name servers directly.
Other tools are less relevant here:
* A. tcpdumpis a packet analyzer and is more advanced for deeper traffic analysis.
* B. tracertis used to trace the route to a destination, not ideal for DNS issues.
* C. nmapis a port scanner and network mapper, not for resolving DNS problems.
#Reference:
CompTIA Network+ N10-009 Official Objectives: 5.1 - Given a scenario, use the appropriate network troubleshooting tools.
257. Frage
SIMULATION
A network technician replaced an access layer switch and needs to reconfigure it to allow the connected devices to connect to the correct networks.
INSTRUCTIONS
Click on the appropriate port(s) on Switch 1 and Switch 3 to verify or reconfigure the correct settings:
* Ensure each device accesses only its
correctly associated network.
* Disable all unused switchports.
. Require fault-tolerant connections
between the switches.
. Only make necessary changes to
complete the above requirements.
Antwort:
Begründung:
See the solution below in Explanation
Explanation:
To provide a complete solution for configuring the access layer switches, let's proceed with the following steps:
Identify the correct VLANs for each device and port.
Enable necessary ports and disable unused ports.
Configure fault-tolerant connections between the switches.
Configuration Details
Switch 1
Port 1 Configuration (Uplink to Core Switch)
Status: Enabled
LACP: Enabled
Speed: 1000
Duplex: Full
VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN150, VLAN220 Port 2 Configuration (Uplink to Core Switch) Status: Enabled LACP: Enabled Speed: 1000 Duplex: Full VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN150, VLAN220 Port 3 Configuration (Server Connection) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN90 (Servers) Port 4 Configuration (Server Connection) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN90 (Servers) Port 5 Configuration (Wired Users and WLAN) Status: Enabled LACP: Enabled Speed: 1000 Duplex: Full VLAN Configuration: Tagged for VLAN60, VLAN120, VLAN150 Port 6 Configuration (Wired Users and WLAN) Status: Enabled LACP: Enabled Speed: 1000 Duplex: Full VLAN Configuration: Tagged for VLAN60, VLAN120, VLAN150 Port 7 Configuration (Voice and Wired Users) Status: Enabled LACP: Enabled Speed: 1000 Duplex: Full VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN220 Port 8 Configuration (Voice, Printers, and Wired Users) Status: Enabled LACP: Enabled Speed: 1000 Duplex: Full VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN220 Switch 3 Port 1 Configuration (Unused) Status: Disabled LACP: Disabled Port 2 Configuration (Unused) Status: Disabled LACP: Disabled Port 3 Configuration (Connection to Device) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN1 (Default) Port 4 Configuration (Connection to Device) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN1 (Default) Port 5 Configuration (Connection to Device) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN1 (Default) Port 6 Configuration (Connection to Device) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN1 (Default) Port 7 Configuration (Connection to Device) Status: Enabled LACP: Disabled Speed: 1000 Duplex: Full VLAN Configuration: Untagged for VLAN1 (Default) Summary of Configurations Ports 1 and 2 on Switch 1 are configured as trunk ports with VLAN tagging enabled for all necessary VLANs.
Ports 3 and 4 on Switch 1 are configured for server connections with VLAN 90 untagged.
Ports 5, 6, 7, and 8 on Switch 1 are configured for devices needing access to multiple VLANs.
Unused ports on Switch 3 are disabled.
Ports 3, 4, 5, 6, and 7 on Switch 3 are enabled for default VLAN1.
Ensure All Switches and Ports are Configured as per the Requirements:
Core Switch Ports should be configured as needed for uplinks to Switch 1.
Ensure LACP is enabled for redundancy on trunk ports between switches.
By following these configurations, each device will access only its correctly associated network, unused switch ports will be disabled, and fault-tolerant connections will be established between the switches.
258. Frage
......
Trotzdem sagen viele Menschen, dass das Ergebniss nicht wichtig und der Prozess am allerwichtigsten ist. Aber diese Darstellung passt nicht in der CompTIA N10-009 Prüfung, denn die Zertifizierung der CompTIA N10-009 können Ihnen im Arbeitsleben in der IT-Branche echte Vorteile mitbringen. Wenn Sie Entschluss haben, die Prüfung zu bestehen, dann sollten Sie unsere CompTIA N10-009 Prüfungssoftware benutzen wegen ihrer anspruchsvollen Garantie. Wenn Sie noch zögern, können Sie zuerst unsere kostenlose Demo der CompTIA N10-009 probieren. Dadurch werden Sie empfinden die Konfidenz fürs Bestehen, die wir EchteFrage Ihnen mitbringen!
N10-009 Fragenkatalog: https://www.echtefrage.top/N10-009-deutsch-pruefungen.html
Campus : Level 1 190 Queen Street, Melbourne, Victoria 3000
Training Kitchen : 17-21 Buckhurst, South Melbourne, Victoria 3205
Email : info@russellcollege.edu.au
Phone : +61 399987554